Модификации:Основные возможности

Материал из Stardew Valley Wiki
Перейти к навигации Перейти к поиску

← Модификации

Robin building.png
“ “Предстоит ещё много работы...”
— Робин

Неполный перевод

Эта статья или её часть до сих пор не переведены на русский язык. Вы можете оказать помощь в переводе путем ее редактирования.
Последний раз редактировалось GIDMYRT в 2018-08-12 15:07:33.

В этой статье описываются основные возможности SMAPI. Перед прочтением данной статьи, рекомендуется прочитать Modder Guide и Game Fundamentals.

Основы

Отслеживание изменений переменной

Модам часто приходится отслеживать изменение какого-либо значения. Если для значения в SMAPI нет события, можно создать приватное поле для отслеживания значения, и обновлять его, используя событие обновления. Например, вот полностью работающий мод, который выводит сообщение в консоль, когда выносливость игрока изменяется: 

/// <summary>Входная точка мода.</summary>
internal class ModEntry : Mod
{
    /*********
    ** Свойства
    *********/
    /// <summary>Последнее значение выносливости игрока.</summary>
    private float LastStamina;


    /*********
    ** Публичные методы
    *********/
    /// <summary>При первой загрузке мода вызывается метод Entry</summary>
    /// <param name="helper">Provides simplified APIs for writing mods.</param>
    public override void Entry(IModHelper helper)
    {
        SaveEvents.AfterLoad += this.SaveEvents_AfterLoad;
        GameEvents.UpdateTick += this.GameEvents_UpdateTick;
    }


    /*********
    ** Приватные методы
    *********/
    /// <summary>Метод вызываемый при загрузке сохранения.</summary>
    /// <param name="sender">The event sender.</param>
    /// <param name="e">The event arguments.</param>
    private void SaveEvents_AfterLoad(object sender, EventArgs e)
    {
        this.LastStamina = Game1.player.Stamina;
    }

    /// <summary>Метод вызывается после события обновления (около 60 раз в секунду).</summary>
    /// <param name="sender">The event sender.</param>
    /// <param name="e">The event arguments.</param>
    private void GameEvents_UpdateTick(object sender, EventArgs e)
    {
        // выходим, если сохранение еще не загружено
        if (!Context.IsWorldReady)
            return;

        // выходим, если значение выносливости не изменилось
        float currentStamina = Game1.player.Stamina;
        if (currentStamina == this.LastStamina)
            return;

        // выводим сообщение и обновляем значение свойства LastStamina 
        this.Monitor.Log($"Player stamina changed from {currentStamina} to {this.LastStamina}");
        this.LastStamina = currentStamina;
    }
}

Предметы

Предметы - это объекты, которые могут быть помещены в инвентарь. Инструменты, культуры и т.п.

Создание предмета (Объекта)

Конструкторы класса для создания предмета: 

 public Object(Vector2 tileLocation, int parentSheetIndex, int initialStack);
 public Object(Vector2 tileLocation, int parentSheetIndex, bool isRecipe = false);
 public Object(int parentSheetIndex, int initialStack, bool isRecipe = false, int price = -1, int quality = 0);
 public Object(Vector2 tileLocation, int parentSheetIndex, string Givenname, bool canBeSetDown, bool canBeGrabbed, bool isHoedirt, bool isSpawnedObject);

Где parentSheetIndex это ID предмета (может быть найдено в ObjectInformation.xnb).

Создание предмета на поверхности

 public virtual bool dropObject(Object obj, Vector2 dropLocation, xTile.Dimensions.Rectangle viewport, bool initialPlacement, Farmer who = null);

 // Спавн предмета в локации:
 Game1.getLocationFromName("Farm").dropObject(new StardewValley.Object(itemId, 1, false, -1, 0), new Vector2(x, y) * 64f, Game1.viewport, true, (Farmer)null);

Добавление предмета в инвентарь

//todo

Удаление предмета из инвентаря

Удаление зависит от инвентаря. Чаще всего вызывается метод класса Player, расположенного в пространстве имен Farmer.

Чтобы удалить предмет в большинстве ситуаций необходимо просто вызвать метод .removeItemFromInventory(Item)

Locations

The GameLocation is a representation of any place in the game (e.g. Farm, Town)

The list of current locations is stored in Game1.currentLocations

Important Caveat: In 1.3 onwards, the Game1.currentLocations is not reliable for farmhands in MP.

Map Properties

You can edit many properties of the current map and the tiles in the map. This is already documented here Map Properties

Tiles

terrainFeatures contains information about the tiles. (e.g. dirt, grass, crops, etc.)

objects contains information about objects on top of tiles. (e.g. crops, stones)

Handling TerrainFeatures

As terrainFeatures is a NetField, always use .Pairs to access it for enumeration. The .Key value of this stores the location, and the .Value contains the terrainFeature itself. As a note, this includes items spawned off the map, which is usually cleared at end of day.

If you need to access just crops, this snippet will be of use: 

foreach (var tf in Game1.getFarm().terrainFeatures.Pairs)
{
    if ((tf.Value is HoeDirt hd) && hd.crop != null)
    {
        // do crop like things here.
    }
}

If you need some other location, sub that out for Game1.getFarm(). Note this doesn't null check Farm! Make sure Farm is loaded.

Handling Objects

There are several fields that handle objects, but always use the .objects one. The same rules apply as in TerrainFeatures, except that you really can't place objects beyond the edge of the map.

Player

//todo describe section

Position

A Character's position indicates the Character's coordinates in the current location.

Position Relative to the Map

Each location has an ``xTile`` map where the top-left corner of the map is (0, 0) and the bottom-right corner of the map is (location.Map.DisplayWidth, location.Map.DisplayHeight) in pixels.

There are two ways to get a Character's position in the current location: by absolute position and by tile position.

Position.X and Position.Y will give the XY coordinates in pixels.

getTileX() and getTileY() will give the XY coordinates in tiles.

Each tile is 64x64 pixels as specified by Game1.tileSize. The conversion between absolute and tile is as follows: 

// Absolute position => Tile position
Math.Floor(Game1.player.Position.X / Game1.tileSize)
Math.Floor(Game1.player.Position.Y / Game1.tileSize)

// Tile position => Absolute position
Game1.player.getTileX() * Game1.tileSize
Game1.player.getTileY() * Game1.tileSize

// Tilemap dimensions
Math.Floor(Game1.player.currentLocation.Map.DisplayWidth / Game1.tileSize)
Math.Floor(Game1.player.currentLocation.Map.DisplayHeight / Game1.tileSize)

Position Relative to the Viewport

The viewport represents the visible area on the screen. Its dimensions are Game1.viewport.Width by Game1.viewport.Height in pixels; this is the same as the game's screen resolution.

The viewport also has an absolute position relative to the map, where the top-left corner of the viewport is at (Game1.viewport.X, Game1.viewport.Y).


The player's position in pixels relative to the viewport is as follows: 

Game1.player.Position.X - Game1.viewport.X
Game1.player.Position.Y - Game1.viewport.Y

NPC

Creating Custom NPCs

Adding new NPCs involves editing a number of files:

  • New file: Characters\Dialogue\<name>
  • New file: Characters\schedules\<name>
  • New file: Portraits\<name>
  • New file: Characters\<name>
  • Add entries Data\EngagementDialogue for NPCs that are marriable
  • Add entry to Data\NPCDispositions
  • Add entry to Data\NPCGiftTastes
  • Add entries to Characters\Dialogue\rainy
  • Add entries to Data\animationDescriptions (if you want custom animations in their schedule)

All of the above can be done with IAssetLoaders/IAssetEditors or Content Patcher. Finally, spawn the NPC with a SMAPI mod. The different constructors are: 

 public NPC(AnimatedSprite sprite, Vector2 position, int facingDir, string name, LocalizedContentManager content = null);
 public NPC(AnimatedSprite sprite, Vector2 position, string defaultMap, int facingDir, string name, Dictionary<int, int[]> schedule, Texture2D portrait, bool eventActor);
 public NPC(AnimatedSprite sprite, Vector2 position, string defaultMap, int facingDirection, string name, bool datable, Dictionary<int, int[]> schedule, Texture2D portrait);

For spawning: 

 Game1.getLocationFromName("Town").addCharacter(npc);

UI

The UI is a collection of separate elements which make up the HUD and occasional popups.

//todo expand section.


HUDMessage are those popups in the lower left hand screen. They have several constructors, which we will briefly go over here (a few non relevant ones have been snipped): 

  public HUDMessage(string message);
  public HUDMessage(string message, int whatType);
  public HUDMessage(string type, int number, bool add, Color color, Item messageSubject = null);
  public HUDMessage(string message, string leaveMeNull)
  public HUDMessage(string message, Color color, float timeLeft, bool fadeIn)


So before we go over when you'd use them, I'm going to briefly note how the class HUDMessage uses these. (I encourage people to read the class if they have further questions, but I doubt most of us will need to know more than this)


WhatType:

  • 1 - Achievement
  • 2 - New Quest
  • 3 - Error
  • 4 - Stamina
  • 5 - Health


Color: Fairly obvious. It should be noted that while the first two don't give an option (they default to Color:OrangeRed), the fourth with the param 'leaveMeNull' displays as the same color as the game text.


For specifics:

  • public HUDMessage(string type, int number, bool add, Color color, Item messageSubject = null); - This allows for expanded customization of the message. More often used for money.
  • public HUDMessage(string message, string leaveMeNull) - Also displays no icon.
  • public HUDMessage(string message, Color color, float timeLeft, bool fadeIn) - Displays a message that fades in for a set amount of time.


Note: For those of you who want a custom HUDMessage: - Almost all of these variables are public, excluding messageSubject, so feel free to customize!


For example: add a new HUDMessage to show [insert image] toaster popup. 

Game1.addHUDMessage(new HUDMessage("MESSAGE", 3));

Menus

//todo describe section

Get the Active Menu

You can use Reflection to get the current active menu in GameMenu. The GameMenu contains the Inventory, Skills, Social, Map, Crafting, Collections, and Options pages in this respective order, accessed by the tab index with inventoryTab at 0. 

if (Game1.activeClickableMenu is GameMenu menu) {
  IList<IClickableMenu> pages = this.Helper.Reflection.GetField<List<IClickableMenu>>(menu, "pages").GetValue();
  IClickableMenu page = pages[menu.currentTab];

  // Example for getting the MapPage
  MapPage mapPage = (MapPage) pages[menu.currentTab];

  // Two examples of checking if MapPage is open
  pages[menu.currentTab] is MapPage || menu.currentTab == GameMenu.mapTab;
}

Set the Active Menu

Game1.activeClickableMenu = <Menu>

Simple Menu

Copy the menu you want from the game and make it your own

Harmony

“ “Here be dragons. Thou art forewarned.”

Harmony lets you patch Stardew Valley methods directly. This is very powerful, but comes with major caveats:

  • It's very easy to cause crashes, errors, or subtle bugs.
  • It may cause difficult-to-diagnose memory corruption errors.
  • Crossplatform compatibility is not guaranteed, and should be tested on all three platforms.
  • May conflict with other Harmony mods (e.g. if two mods patch the same method, or two mods try to load different versions of Harmony).
  • Harmony patch errors may have unpredictable effects on other mods that aren't using Harmony.

Using Harmony should be a last resort, and is deliberately not documented.

Other

Add a small animation

location.temporarySprites.Add(new TemporaryAnimatedSprite(...))

See TemporaryAnimatedSprite for more details

Play a sound

location.playSound("SOUND");

(e.g. "junimoMeep1")

Send a letter

Use IAssetEditor to inject new mail into Data\Mail.xnb. Then use Game1.addMailForTomorrow to send it to the player. 

 public static void addMailForTomorrow(string mailName, bool noLetter = false, bool sendToEveryone = false);

Where mailName is the letter key in Mail.xnb. If you use the string wizard anywhere in the letter key, the letter will have the Wizard's new background (since 1.3) automatically.

Open source

When all else fails, when you've looked at the decompiled source too long and it makes no sense, take a look at some open-source mod code! See the 'source' column in the mod compatibility list for source code.

Источник — https://ru.stardewvalleywiki.com/mediawiki/index.php?title=Модификации:Основные_возможности&oldid=5852